The ANTRACK V1 is a cutting-edge mining unit designed to contain four ANTMINER S21 Hyd units, while optimizing the mining process using hydro-cooling technology. With a substantial capacity and a maximum power load of 24 kW, it efficiently meets the energy demands of cryptocurrency mining.
The unit has outstanding dimensions of 600mm width, 2000mm height, and 1000mm depth, with a substantial net weight of 300 kg, providing stability and longevity. An EJ45 Ethernet 10/100M interface provides dependable and rapid data transport. The power supply is as impressive, with an AC input voltage of 380 to 415 volts, a frequency of 50 to 60 Hz, and an input current of 80 amps.
The ANTRACK unit is precisely constructed to enable speedy deployment and efficient heat recovery, representing a big step forward in the hydro-cooling mining experience.
Bitmain Antrack V1 Hydro Specifications:
Product Glance
| Model | ANTRACK |
| Version | V1 |
| Capacity | 4 units ANTMINER (S21 Hyd.) |
| Maximum load,kW | 24 |
Hardware configuration
| Size (width*height*depth),mm | 600*2000*1000 |
| Net weight, kg | 300 |
| Network connection mode | EJ45 Ethernet 10/100M |
Power supply
| Power supply AC input voltage, Volt(1-1) | 380~415 |
| Power supply AC input frequency range, Hz | 50~60 |
| Power supply AC Input current, Amp(1-2) | 80 |
Environment requirements
| Ambient temperature, °C | 15~45 |
| Water flow, L/min | 32.0~40.0 |
| Water pressure, bar | ≤3.5 |
| Working fluid(1-3) | Deionized water/Pure water |
| Liquid PH | 8.5~9.5 |
| Storage temperature, °C | -20~70 |
| Operation humidity(non-condensing), RH | 10~90% |
NOTE:
- Caution: Wrong input voltage may probably cause miner damaged
- Three-phase AC input.
- If the water conductivity is ≥100 μs/cm, the fluid must be replaced. The water conductivity is less than 20 μs/cm when the system is running at the first time.